"I have recently used both Bond Apatite® and BondBone® (3D Bond™), and both are bone graft materials that produce amazing bone. Neither product leaves excess granules, and they both produce a result that feels like the patient's original bone. I have also used the BondBone® (3D Bond™) as a membrane to close an open sinus lift and have gotten equally outstanding results. And of course, the service Augma provides is exemplary. "
"The ultimate goal for bone regeneration is vital bone formation. Having used many grafting materials over the years, I have found 3D Bond™ as one of my favorite materials, giving an advantage in handling due to its cemental properties and the ability to transfer rapidly to vital bone. I have been using the material extensively in my everyday procedures with high satisfaction.
Bond Apatite® is a recent improvement to the material which gives the user the ability to have a pre-mixed material for large defect reconstruction."
"I have used many forms of graft materials. 3D bond is very easy to use. Patients love that it is made of calcium sulfate, the oldest bone replacement graft. Most importantly, as this is a biphasic calcium sulfate, it sets in the presence of both blood and saliva. The analysis of numerous cases shows that it predictably forms bone in many parts of the mouth and often doesn't even need a barrier. Because of those reasons and the cost savings over other graft and barrier combinations it has greatly increased patient accepting of bone grafting procedures."
After many years of using a wide spectrum of bone graft materials, I have found a material that has all of the features required to necessary to carry out oral augmentation procedures, and that material is Augma Biomaterials “Bond Apatite”. The material is stable, easy to use, and works well with soft tissue. Today, I can safely say that Augma’s Bond Apatite is my first choice for oral augmentations.
"I'd like to recommend Aumga's bone graft cement products.
Working with them is easy and comfortable; the healing is fast and the results are great!
I warmly recommend other clinicians to try using those bone graft substitutes and enjoy convenient job and best results. "
"I have been working with bone graft substitutes for 20 years now, and I can finally say with confidence that I have found the perfect one. Augma's Bond Apatite is not only easy to work with, but its revolutionary bi-phasic calcium sulfate composition provides the results I expect from a bone graft material. It is truly a pleasure to be able to work with such a reliable bone graft substitute for my implant procedures; one that is available and manufactured right here in Israel."
"For many years I perform augmentation procedures and I was used to granules bone substitute which give good results with the existing limitations.
Although it's difficult to change habits due to fear to fail, few years ago I fortunately got the chance to experience BondBone® and then 3D Bond™ and Bond Apatite® products which are bone graft substitutes based on cement. To my amazement, I found cement bone graft substitutes, convenient and simple to use, save time and give amazing results with very good bone quality. Of course, you need to use it with the appropriate indications. As with new things, there is a learning curve that must be overcome and I am convinced that the future in bone substitute and dental surgery goes towards cements bone graft substitutes due to the great benefits they present. "
"Amos Hello! I admit that in the beginning I've got your materials with slight skepticism in light of so many addressing from other companies, however due to your enthusiasm I decided to invest and try Augma’s bone graft material. During this year, more than ten cases have showed surprising and very good results either with vertical and horizontal bone building. The material is friendly and easy to use and is used routinely in our clinic.
We are planning to include this bone graft cement in our becoming courses which suppose to be on the coming months.
Thank you again for the privilege to use Augma’s products and to have known you. "
"3D Bond™ and Bond Apatite® are two new materials that open up new opportunities in the field of bone remodeling and additions. Easy to prepare, easy to apply & easy to use. Once you overcome the learning curve and you use it with the appropriate indications you'll get some amazing results and a very good bone quality, using new material that gives you safety, reliability, and allows you to create new smiles, using the FUTURE!
3D Bond™ and Bond Apatite® allows you to work easier, faster, more relaxed.
For me 3D Bond™ and Bond Apatite® means better results, easy handling and a happy me!"
Try it and you will love it!
"After more than 17 years of using bone graft materials, I have to admit that the Bond Apatite® product is suitable for many indications, easy to use, packed in very comfortable delivery system (syringe), derives excellent results in very high predictability (when you use it right according to instructions), very friendly and in good price "
I would like to share with you my experience with new bone graft cement by Augma company-Bond Apatite® .
I started using this product six months ago and now I am getting my first results.
As with any new material, I used Bond Apatite® in the beginning with small number of cases: four cases of lateral augmentations in different levels.
In all of them I had great success, clinically and radiographically. However, one of the cases even surprised me. The case involved placed implant in the inferior molar area 36 with large deficiency of the buccal plate, which required bone grafting and augmentation procedure. After placing the implant and decortication of the bone I augmented with Bond Apatite® .Since this case involved just a single implant and the quantity of the material’s syringe is 1 cc (there is still no smaller packaging), excess material was left in place. I removed some excess and with the rest I covered the ridge and the head of the implant. In this particular case I didn’t use a membrane, however I closed passively and hermetically the soft tissue. Reentry and implant exposure was preformed after 4 months. In the radiography, before the exposure, I distinguished a radiopacity layer above the implant head. As well, while elevating the flap there was a respectable amount (1-2 mm height) of hard vital bone, that required certain effort from me in order to discover the head of the implant. In fact, I also got a vertical height of vital bone with good mechanical properties.
I will be glade to share with you additional interesting and surprising cases in the future.
"I have been successfully using your "BondBone" product for years, so I was excited when I heard about the recent release of your new product, "Bond Apatite". When I began using Bond Apatite, I was impressed, as it exceeded my expectations. Not only was it user-friendly and highly conducive to use in a clinical environment, it provided predictable and top-notch results. Both of these products, "BondBone" and "Bond Apatite", have earned my respect and I highly recommend their use in any dental bone graft application. These are two weapons that any clinician that deals with surgery and implantology needs to have in their arsenal."
I have been using augma bone cement for over two years. The main reason I decided to use augma was the fact that I have an osteoconductive material that I can safely and predictably bring to the surgical site and could expect bone. The delivery system and ease of use are an excellent benefit. Grafting large posterior sockets is done easily and FAST. I even uses the cement as a membrane over a sinus window, or other large defects that needed support - In many applications no tacks or screws required. I highly recommend adding augma bone cement to one's clinical grafting armamentarium.
I, the undersigned, am a maxillofacial surgeon for over 12 years. I hold the position of senior staff surgeon at Hadassah Hospital in Jerusalem. In addition, I provide oral and maxillofacial surgical services at multiple dental clinics across the country.
Through the years I have been extensively involved in the regeneration and osseous reconstruction field, as well as presenting multiple lectures on this topic in Israel and around the world.
I have used a wide array of bone substitute products and membranes for the purpose of augmenting and reconstructing a wide range of complex and challenging osseous defects. I had employed a variety of techniques, that differed from one patient to another. On occasion, I would experience unpleasant failures and complications even with relatively simple surgical procedures.
Recently, I have been introduced and exposed to a relatively new type of bone substitute, Bond Apatite from AugmaBio. I felt a favorable change in the selection of this bone substitute, as well as its application in a simple and rapid deployment technique. This product can fit any patient whom suffers from an osseous defect. Whether the defect is small or large, Bond Apatite can be used successfully. I was able to obtain adequate and promising regeneration without any failure at all. This benefits the patient as well as the doctor.
It is without a doubt that I see in this bone substitute a bright future here and worldwide. Bond Apatite will bring forth a tremendous change to the concept of bone regeneration. Many more clinicians, like myself, were waiting for this significant change. With proper application and a short simple clinical protocol, Bond Apatite is an indispensable addition to the surgical armamentarium. Surgeons, as well as other dental clinicians with basic surgical expertise, will be able to arrive at a grafting solution with ease determination and tremendous satisfaction for both patient and doctor.
Dr. Guy Sharfi
Oral Maxillofacial Surgeon
Augma biomaterial, Bond Apatite and 3D Bond, is used in my private practice, live surgical workshops and lecture/workshop presentation at various teaching venues. This graft material is packaged in an easy to use syringe. It is simple to use for socket grafts, sinus augmentation and restoring larger defects. The results are that as the bone graft is resorbed, it is replaced with regeneration of the patient’s own bone.
Dennis Smiler, DDS, MScD
Oral & Maxillofacial Surgeon
I am practicing Implant dentistry since 1986. My practice is limited to implant and Oral rehabilitation. I performed thousands of implants and augmentation procedure in the past 30 years.
I was got exposed to Augma Biomaterials bone cements 8 years ago when the company just started. I was very skeptical, and the product looks like it was too good to be true. After using it, I must admit that I was completely surprised from the simplicity of the material. I also found outstanding reaction of the soft and hard tissue to the material. The outcome I got after 3 months was real bone. I also found it to be minimal invasive material to use. I used 3D Bond and Bond Apatite daily for all my bone grafting procedure, separately or simultaneously with implant placement. I also use it for lateral augmentation, ridge preservation, large 3D bone defects, sinus lifts, zigoma implants cases, periodontal defects, dehiscence and fenestration cases around natural tooth and implants.
I highly recommend to use of Augma bone cements to any clinician who perform augmentation procedures. It is highly predictable, extremely simple to use and cost effective as well.
Dan Rosen DDS.